Gate management software for airports
Fill the gates you have.
See which gates sit idle, which airline works its gates hardest, and where the airport runs short when flights run late, without building a single new gate.
Chockwise is airport gate management software for airport commercial, properties and operations teams. It measures gate and stand utilization from real flight data, so you can see where gate allocation has room, compare airlines fairly and put a number on unused capacity. There are no cameras to install and no AODB integration to start.
Fill idle gates
How many more flights could the airport take today?
Chockwise fits extra turns into the real gaps at every gate, by hour and by aircraft size. It then shows which gates sit empty in the same hours every day, and which airline would gain most from each one.
With every plane left at its gate as flown: 211 and 27.
Airlines under 75% of the airport's average are flagged.
Measure every airline
Which airlines work their gates hardest?
Every airline is measured the same way: gates, planes per gate, idle hours, turn times, on-time departures and tows. Airline names can be hidden, so the page can go into a meeting as Airline A, B and C.
Plan for late flights
Where does the airport run out of gates?
See the spare gates in each terminal, hour by hour, and what happens to the next arrival when a plane overstays by 30 minutes. Wide-body gates are counted on their own, because they run out first.
Put a number on it
What is the unused room worth in a year?
The Gate Briefing opens with three answers for your airport: room to add flights, the risk when flights run late, and what the room is worth at your own fee per turn. Send any page to an airline as a read-only link.
Nothing to install. Every airline, measured the same way.
No cameras, no integration
Chockwise is software and data only. There is nothing to fit on the apron and nothing to connect to your systems.
Your gates, as you drew them
Every gate is on the map at its real position, with the largest aircraft it has handled and the gates that share a wide-body stand.
See how other airports compare
264 airports and 10,495 gates are mapped today, each measured the same way as yours.
Chockwise does not replace your AODB, resource-management system or docking guidance, which assign and run the day. It is the gate utilization and allocation view beside them, built from flight data.
Gate use is worked out from flights, so "exclusive", "preferential" and "common use" describe how gates are actually used, not lease terms.
Questions
Is Chockwise gate management software for airports?
Yes, for the planning and review side: gate and stand utilization, idle capacity, airline comparisons and allocation what-ifs. It is not a day-of-operations system that assigns the next arrival or drives flight information displays.
Can it help with gate allocation and stand allocation?
It shows where allocation has room, which airlines use their preferential gates least, how hard common-use gates work and which airline would likely add the most flights at a given gate. Final assignments still happen in your AODB or resource-management system, under your rules.
Will it tell us what unused gate capacity is worth?
The Gate Briefing estimates the extra turns that fit and applies the fee per turn you enter. Any dollar figure is only as good as that fee, and the example on this page is labeled as one.
Do we have to install cameras or connect our AODB?
No. There is no hardware and no integration needed to start.
How does Chockwise compare airlines fairly?
Every airline is measured the same way from flight data: gates used, planes per gate, idle hours, turn times, on-time departures and tows. Names can be hidden, so a page can go into a meeting as Airline A, B and C.
Is it only for large hubs?
No. The same method runs at every airport Chockwise maps, including mid-size airports where a few idle gates decide whether a new service fits.